Changes in KEGS v1.34 since v1.33 (01/15/24)
- Fix bug where no config.kegs file could sometimes cause a crash.
- Richard Bennett fixes: Change menus to be retina, and add About dialog
- Save the main window size and position in config.kegs (but not automatically)


Changes in KEGS v1.33 since v1.32 (12/10/23)
- Add command line argument support to set any disk (-s5d1=Data.po
or -s7d12 bigdisk.hdv) or any knob that is listed in config.kegs.
- Add -cfg path_and_name_of_config_kegs file to use a particular config.kegs
file.
- Fix Code Red when leaving the configuration screen (F4) using the last
menu item "Exit Config".
- Allow pasting of control-characters such as Ctrl-D and Ctrl-H.


Changes in KEGS v1.32 since v1.31 (11/22/23)
- Fix (dloc,x) in emulation mode to wrap as described at
https://github.com/gilyon/snes-tests/tree/main/cputest
- Improve virtual hard drive in slot 7 to use a small driver at $C700 which
uses WDM $C7,$00 to call back to KEGS for handling commands.
- Improve SCC8530 emulation to add support for RTxC as clock for higher speeds.
- Fix a GS/OS visual anomaly with the mouse cursor sometimes disappearing
when moving upwards, due to Scanline interrupts not being taken
properly.
- Support qkumba's code to run from $C050 by having get_remaing_opcodes()
track time properly, and to have reads to $C050-$C057 call float_bus()
before doing the softswitch action.


Changes in KEGS v1.31 since v1.30 (11/04/23)
- Fix Windows failure where KEGS would quit on startup if config.kegs
contained a new ROM path.
- Fix a Code Red halt running the Printer57.6 driver where KEGS thought it
might need to generate a baud rate event every .5 cycles.
- Fix disk image selection screen bug where s7d10-s7d12 could wrap and make
it hard to leave the screen.
- Add a Slinky RAM card in slot 4 (with no firmware), works even with
Mockingboard.
- Fix scanline interrupts which were happening too early starting with
version 1.24.
- Another false read bug was causing 16-bit RMW cycles to read the next
address (which is incorrect).


Changes in KEGS v1.30 since v1.29 (09/23/23)
- Proper emulation of the $C080-$C08F language card soft switches.
- Improved INTC8ROM emulation, so a2audit passes (with Apple //e ROMs)
- Fix SCC RR2B register emulation for Colin Leroy-Mira's telnet.system.
- Fix SCC remote IP mode to restart the connection if the remote side ended
it due to idleness, to better handle connecting to printers.
- RAMRD/RAMWRT/ST80COL/etc. apply to bank $E0 as well as to bank $00. This
was not emulated properly before. This fixes the AppleLink Terminal
application.


Changes in KEGS v1.29 since v1.28 (09/05/23)
- Improved disk arm emulation for 5.25" disks
- Enable use of a real serial port on Linux, and improve real serial port
emulation on Mac.
- Add serial "outgoing IP" to allow slot 1 serial to be sent directly to
a real printer (often port 9100).
- When mounting an image from a .zip file, you can press Cmd-A and all
subsequent images will also be mounted in consecutive drives.
This is useful for the new wita2gs_0_70.zip.
- Allow "unlocking" locked images from .zip files, to allow code to write to
them (but it's all in memory, so all changes are lost when KEGS
exits).
- Fix DiskCopy4.2 image detection, to handle images of sizes other than 800KB.


Changes in KEGS v1.28 since v1.27 (06/21/23)
- Reduce status lines under the window from 7 lines of text to 4.
- Fix Windows10 crash when KEGS was minimized (Windows set the window size to
0, which was unexpected, and led to a divide-by-0).
- Enable live window resizing on Windows64. Speed up the video scaling for
X11 and Windows.
- Allow the ZipGS speed, which was fixed at 8MHz previously), be set to
8MHz, 16MHz, 32MHz, 64MHz, or 128MHz.
- Fix a false read bug which broke SCC emulation. LDA $BFFD,X where X=$3D
was "false" reading $C039, not $BF39 as it should, leading to SCC
state being incorrect.