http://www.winuae.net/files/b/winuae_3100b17.zip

Beta 17:

• Restrict GUI IDE units to 2 if device is single port and without IDE doubler support.
  
• Added recursive ROM scan option to Paths panel. Currently restricted to 2 directory levels.
  
• HAM-E Plus average pixel calculation bug fixed in hires mode.
  
• "Direct" serial mode and Amiga serial receive buffer is full and program does not clear buffered byte before new byte arrives (uses emulated serial speed): keep waiting until program reads the buffered byte. Previously it was possible to lose received characters in some situations.
  
• Windows 10 TP hack (b13) removed, build 10061 fixed it. RIM_TYPEHID RawInput bug is also fixed in 10061.
  
• VGA autoresolution hiressuperhires switch was unreliable, it didn´t set internal "config changed" variable.
  
• If DirectInput device acquire call fails 10 times, ignore the device and stop error logging until all devices needs to be re-acquired (for example focus is lost and regained or GUI is entered and exited)
  
• Entering ROM panel possible crash fixed.
  
• Newtronic Technologies Video DAC 18 RGB port video adapter emulation. (Format encoding information by mark_k)
  
• If programmable hsync or vsync enabled with out of range values: syncs stop, stop also CIA-A (if vsync timed) and/or CIA-B TOD counting.
  
• Archos AVideo 12 emulation. Denise adapter, not AGA compatible, can´t be AGA compatible even in emulation due to custom chipset register conflict. (Information by mark_k)
  
• FBcc and FDBcc FPU instruction didn´t work correctly in more compatible or cycle-exact modes.
  
• Negative boot priority value was parsed incorrectly when loading config file. Broken when manual HDF geometry support was added
  
• If system has built-in touch screen (for example Intel based Windows 8.1 tablet), >3s touch in top/left corner will open GUI. Added because previously it was impossible to enter GUI without external keyboard. Quick hack only, real touch support may or may not be implemented in future.
  
• Made "Double, fields" default for interlace mode.
  
• Added partial 53C400 SCSI chip emulation (53C400 = 53C80 + integrated buffered "fake" dma support + some PC single chip SCSI integration/compatibility features)
  
• Added Roctec RocHard RH800C SCSI emulation (53C400). Emulation is based on boot disk SCSI format utility behavior, for some reason disk loadable driver won´t automount SCSI disks. v2.0 ROM is still MIA. IDE-only (SCSI chip not installed) and IDE+SCSI board subtypes added.
  
• Generate DSKSYN interrupt if DSKSYNC matches zero when DMA is started but before any bits gets transferred. Jukebox 2 / Dreamdealers accidentally (wrong INTREQR bit checked) requires it.

Beta 16:

• Automatic resize used horizontal zoom value for both horizontal and vertical.
  
• Replaced half-integer scaling options with separate select menu with 1/1, 1/2, 1/4 and 1/8 scaling options.
  
• Paths panel portable mode checkbox now switches between modes. NOTE: currently old data is not copied but created from scratch. Switching off portable mode automatically deletes winuae.ini. Switching on portable mode does not delete registry data.
  
• Graffiti/HAM-E mode switch does not anymore change display position.
  
• Added HAM-E Plus emulation. (Probably not correct implemention, currently uses simple average calculation to create extra pixel between each "normal" HAM-E pixel)
  
• Added separate waiting for connection TCP serial option. Old option does not wait anymore.
  
• Fixed 7-bit serial bytes in serial logging/TCP modes (Stop bit=bit7 was not cleared)
  
• Added Roctec RocHard RH800C emulation. rtidedisk.device, 1.0 ROM added which is IDE-only. First port is IDE unit 0, second port is IDE unit 2. Ports are not shared and master-only. (Anyone have v2.0?)

Beta 15:

• Map only upper half of ROM image if GVP Series II ROM is 32k.
  
• HD controller ROM loader duplicate code removal from HD controller specific code.
  
• Accelerator board HD controller hardware was not added to emulation if board´s boot ROM was missing. (b12)
  
• Added DKB 12x0 accelerator on-board RAM support. 1M and 2M size are not supported, address mapping is not completely emulated.
  
• Floppy sound volume mixing fixed (b14).
  
• Oktagon 2008 didn´t have autoboot disable option.
  
• Only keep high Windows timer resolution mode active when emulation is running.
  
• Added Seek (6) and (10) SCSI commands to HD SCSI emulator, only checks for valid LBA.
  
• VGA modes had inverted TV/VGA aspect ratio setting. (Probably not completely correct yet)
  
• Added configurable blanking borders. GUI adjustment hacked to Filter panel, "Overscan blanking" setting. When "Overscan blanking" is selected, filter mode is always none. First slider adjusts horizontal start, second = horizontal end, third = vertical start, fourth = vertical end. Values are always in superhires (horizontal) and interlaced (vertical) coordinates. Zero = disabled. Currently display is only updated with new values after returning to emulation and GUI text elements are not changed.

Beta 14:

• Show selected accelerator board and HD controller name(s) in log lines.
  
• GVP Series I and II HD controllers can now be active at the same time.
  
• Added SCSI controller ID selection (only AdSCSI and A4091 supported so far)
  
• Mark HD controllers with * if it is enabled, becomes [x] if more than 1 controller is active.
  
• Fixed referencing to already freed SCSI/IDE HD controller context structure after reset/restart (b12)
  
• Added SupraDrive AMAB3, AMAB4 and AMAB5 ROMs.
  
• NCR539x based SCSI controllers always accessed unit 0.
  
• Added emulation of edge case when SPRxPOS or SPRxCTL vertical position is updated at the last available dma slot at the end of scanline. Next line´s vertical comparison will match just before this position, in other words, if old value would match in next line and new value does not anymore, comparison match still happens. Fixes Arc Ed / United Forces missing sprite scroller.
  
• Added half-integer scaling option. (*0.5, *1.0, *1.5 and so on)
  
• New Velvet prototype difference found: both CIAs generate level 2 interrupt. Now Velvet tries to boot from disk, reads and executes boot block code if disk has correct bootblock which is different than release AmigaOS bootblock. MFM level format seems to be identical. Unfortunately, at least so far, no original Velvet floppy disks have been found and for some reason real hardware refuses to read any disks.
  
• If -seriallog is enabled, console log window also listens for key codes and sends them to emulated serial port. Very basic console emulator, enables quick use of Velvet ROM built-in serial debugger.
  
• Added "Any floppy drive" option to keyboard led configuration.
  
• Floppy sound volume control is not global anymore. Empty and disk in drive states also have separate volume settings. (Upper volume slider = drive empty, lower slider = disk in drive)
  
• Added fullscreen GUI option to misc panel. Opens GUI in max size, possibly useful with low resolution devices and/or small Windows tablets.
  
• Z3 autoconfig in "UAE" mode didn´t work correctly with hardware RTG boards (b4)